# gkrellmrc theme configuration file template.

# Uncomment and modify configuration options in this file to change the
# GKrellM defaults.  Uncomment means remove the '#' at the beginning of a
# configuration line.

# You can restrict the adjustment range allowed for chart width depending
# on how LED's, labels, PPP timer/button etc. fit or look.

#frame_width  = 4
#chart_width_min  = 50
#chart_width_max  = 200


# Set the colors plotted on the charts.  The xxx_color_grid colors are
# drawn where the plotted data crosses a grid line and at the out to in
# color transition.  This allows grid lines to "show through" on high density
# charts and highlights the transition envelope.  The '#' in front of these
# colors must be present (they are not comments, they are hex numbers).

chart_in_color       = #0081c4
chart_in_color_grid  = #006290
chart_out_color      = #00b084
chart_out_color_grid = #00805d


# Some tweaking on drawing the grid lines.  0 is normal and 1 inhibits
# grid line drawing at the top and bottom of charts.
# This is useful for bg_chart pixmaps that have 3D shading at the top and
# bottom and is a cosmetic effect (try examples/amber).

chart_grid_mode = 1


# Label font and colors set here.  The alt_font is for miscellaneous
# extra labelling and should be a smaller font than the label_font.
# The alt1_color will be for alt_font draws on panel backgrounds
# while alt2_color will be for draws in the bg_chart area.
# The large font is used for clock/calendar digits and uses time_color.

large_font = -adobe-helvetica-medium-r-normal-*-*-100-*-*-p-*-iso8859-1
label_font = -adobe-helvetica-medium-r-normal-*-*-100-*-*-p-*-iso8859-1
alt_font   = -adobe-helvetica-medium-r-normal-*-*-80-*-*-p-*-iso8859-1

label_draw_effect = shadow
time_draw_effect  = shadow
meter_draw_effect = shadow
alt1_draw_effect  = shadow
alt2_draw_effect  = shadow

label_color = #c0c0c0
meter_color = #c0c0c0
time_color  = #c0c0c0
alt1_color  = #c0c0c0
alt2_color  = #c0c0c0


# Negative x values here mean justify x pixels from right frame.
# Positive x values mean justify x pixels from left frame.
# Where to put the LEDs of each net interface monitor in its panel:

rx_led_x = 3
rx_led_y = 8
tx_led_x = -3
tx_led_y = 8


# If bg_timer image exists in theme dir, it will be placed under the timer
# only.  If no bg_timer image exists, set what to do with ppp_border_mode.
#  0: no border   1: put timer in bg_bordered   2: put timer and button in
#  bg_bordered
#ppp_border_mode = 0

# Where to put the PPP time-on-line display in the PPP panel

#ppp_timer_x = 0


# Where to put the PPP button. Note that most Gtk themes put a 3 pixel
# border around pixmaps in buttons. 

#ppp_button_x = -2


# Borders for images are specified with comma separated numbers in the order:
#    left border, right border, top border, bottom border

# Borders for bg_chart and bg_chart_xxx images
style chart.chart_border      = 3,3,2,2
style chart.cpu.chart_border  = 3,3,2,2
style chart.disk.chart_border = 3,3,2,2
style chart.net.chart_border  = 3,3,2,2

# Borders for bg_panel and bg_panel.xxx images for charts
style chart.panel_border      = 2,2,2,3
style chart.cpu.panel_border  = 2,2,2,3
style chart.disk.panel_border = 2,2,2,3
style chart.net.panel_border  = 2,2,2,3

# Borders for bg_meter and bg_meter_xxx
style meter.panel_border      = 2,2,4,4
style meter.mem.panel_border  = 2,2,4,4
style meter.swap.panel_border = 2,2,4,4
style chart.net.panel_border  = 2,2,4,4

# Border for bg_bordered
bordered_border = 2,2,4,4

# Border for the optional bg_timer
#timer_border = 3,3,3,3

# Alignments for the different labes
style chart.label      = 50
style chart.cpu.label  = 50
style chart.proc.label = 50
style chart.disk.label = 50
style chart.net.label  = 50
style meter.label      = 50
style meter.mem.label  = 100
style meter.swap.label = 100

# -----------------------------------------------------------------------
# See the Themes file for comments on krells.

#style  chart.krell_depth = 4;				# Frames in the krell
#style      chart.cpu.krell_depth = 4
#style      chart.disk.krell_depth = 4
#style      chart.net.krell_depth = 4
#style  chart.krell_x_hot = 2				# -1 means center
#style      chart.cpu.krell_x_hot = -1
#style      chart.disk.krell_x_hot = -1
#style      chart.net.krell_x_hot = -1
#style  chart.krell_yoff = 0
#style      chart.cpu.krell_yoff = 0
#style      chart.disk.krell_yoff = 0
#style      chart.net.krell_yoff = 0

#style  meter.krell_depth = 1
#style      meter.mem.krell_depth = 1
#style      meter.swap.krell_depth = 1
#style  meter.krell_x_hot = -1				# -1 means center
#style      meter.mem.krell_x_hot = -1
#style      meter.swap.krell_x_hot = -1
#style  meter.krell_yoff = 0
#style      meter.mem.krell_yoff = 0
#style      meter.swap.krell_yoff = 0
